ZO-HP Antifouling Paint
Price range: $116.00 through $348.00
- Copper-free solvent based bottom paint
- High-performance antifouling paint recommended for fresh and saltwater
- Compatible over most paints
- Easy to apply
- For use on fiberglass, aluminum, steel, and wood hulls
No Air shipping available.
Contact us for pricing and availability of 5 gallon pails.
- Features Pyrithione Zinc and ePaint’s patented photoactive technology to prevent settling and attachment of hard shell-type organisms
- Formulated with fluoro-polymers to provide the lowest friction surface when wet
- Available in quart, gallon, and 5 gallon pail containers
- Available colors: White, Gray, and Safety Orange
- Great choice for the serious sailor
- Extremely effective antifouling protection
- Prevents grass, slime, algae and bacteria
- Offers drag reduction and fuel savings
- Good for boats that are frequently hauled and launched by trailer
- Use case – Excellent antifouling in harsh tropical environments, competitive sailors
- Performance level – Hybrid self-polising surface; ideal for burnishing
- Ideal customer – Boaters in tropical areas; racing sailors
- Key spec differences – fluoro-polymer surface provides low friction surface
ePaint ZO HP is proudly manufactured in the USA. Please contact ePaint.com at websales@epaint.com for more information on ePaint ZO HP or other ePaint products. Download the Product Info Sheet.
- Hybrid finish incorporates benefits of both hard and ablative type paints – hard finish with no old paint buildup.
- Hard surface may be burnished for sailors
- Maximum dry to launch time of 60 days
- Okay to haul boats in and out
- Compatible over many hard antifoulants and epoxy barrier coats
- Paint may be maintenance scrubbed in-water without taking paint off
- Coverage rate: 275 ft2 /gal; 70 ft2 /qt
- Thinner: ePaint EP-13 thinner
- Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP). For a racing finish, spray application is the preferred method, or alternatively roll and wet sand smooth when the finish is hard
- Finish: Eggshell-like finish
- Recommended number of coats: 2 or 3 full coats with 2 extra coats at the waterline and leading edges.
For complete application procedures and requirements see the Tech Data Sheet (PDF).
ePaint Company recommends three full coats plus two additional coats at the waterline.
This calculation is an estimate based only on overall length and beam of your boat; the actual amount of surface area may be slightly different depending on unforeseen factors such as hull design, loss of product during the application, etc.
